Additional Safety Information; Assembly And Adjustments; Operation - Craftsman CMCBL710 Instruction Manual

20v max* axial blower
Hide thumbs Also See for CMCBL710:
Table of Contents

Advertisement

Available languages

Available languages

• Instructions for compatible batteries and chargers are
included for reference in this manual. Read all instruction
manuals included with your battery pack or charger. Read all
cautionary markings on the charger and battery pack.
• Disconnect the battery pack from the blower before
making any adjustments, changing accessories,
servicing, moving or storing the unit. Such
preventative safety measures reduce the risk of starting the
appliance accidentally.
SAVE THESE INSTRUCTIONS

Additional Safety Information


WARNING:
or any part of it. Damage or personal injury could result.

WARNING:
Everyday eyeglasses are NOT safety glasses. Also use face or
dust mask if operation is dusty. ALWAYS WEAR CERTIFIED
SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.

WARNING:
chemicals known to State of California to cause cancer, birth
defects or other reproductive harm. Some examples of these
chemicals are:
• compounds in fertilizers,
• compounds in insecticides, herbicides and pesticides,
• arsenic and chromium from chemically treated lumber.
To reduce your exposure to these chemicals, wear approved
safety equipment such as dust masks that are specially
designed to filter out microscopic particles.

WARNING:
generate and/or disperse dust, which may cause serious and
permanent respiratory or other injury. Always use NIOSH/
OSHA approved respiratory protection appropriate for the
dust exposure. Direct particles away from face and body.

WARNING:
personal hearing protection that conforms to ANSI
S12.6 (S3.19) during use. Under some conditions and
duration of use, noise from this product may contribute to
hearing loss.

CAUTION:
on its side on a stable surface where it will not cause a
tripping or falling hazard. Some tools with a large battery
pack will stand upright but may be easily knocked over.
• Air vents often cover moving parts and should be
avoided. Loose clothes, jewelry or long hair can be caught in
moving parts.
The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
BPM .................... beats per minute
V ......................... volts
min ..................... minutes
j
or DC ............ direct current
.../min .............. per minute
Never modify the power tool
ALWAYS use safety glasses.
Some dust contains
Use of this tool can
Always wear proper
When not in use, place tool
RPM .................... revolutions per
minute
A ......................... amperes
Hz ....................... hertz
W ........................ watts
Wh ...................... watt hours
n o ....................... no load speed
n ......................... rated speed
c
..................... safety alert symbol
h
..................... wear respiratory
protection
f
..................... wear eye
protection
i
..................... Class II
Construction
(double insulated)

ASSEMBLY AND ADJUSTMENTS


WARNING:
personal injury, turn unit off and remove the battery
pack before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
Blow Tube Assembly (Fig. B)

WARNING:
without tube securely in place. Never reach down into housing
through tube hole.

WARNING:
when you leave blower unattended or when storing, checking,
adjusting, cleaning, or working on blower.
1. To attach the lower tube
the peg 
 9 
of the upper tube 
lower tube opening
and push the two tubes together
11
until the tube locks
engage the blower tube and an
6
audible click is heard as shown in Fig. B.
2. To attach the blower tube assembly
head 
 3 
, align the peg 
 13 
notch 
 14 
on the blower tube assembly opening as shown
in Fig. B.
3. Push the blower tube assembly onto the power head
until the tube locks
engage the blower tube
6
audible click is heard.
4. Pull on the blower tube assembly
secured in place.
5. To remove the blower tube assembly, squeeze both
tabs 
on the side of the power head and pull the blower
 6 
tube assembly off.

OPERATION


WARNING:
serious personal injury, turn unit off and remove
the battery pack before making any adjustments or
removing/installing attachments or accessories. An
accidental start-up can cause injury.
Proper Hand Position (Fig. C)

WARNING:
personal injury, ALWAYS use proper hand position as shown.

WARNING:
personal injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the main
handle 
 2 
.
English
g
..................... wear hearing
protection
a
..................... read all
documentation
n
..................... avoid staring at
light
l
or AC............ alternating current
Ah ....................... amp hours
To reduce the risk of serious
Do not operate blower
Always remove the battery
4
to the upper tube 
 5 
 5 
with the notch 
 10 
to the power
12
on the power head with the
and an
5
12
to ensure it is
To reduce the risk of
To reduce the risk of serious
To reduce the risk of serious
, align
of the
5

Advertisement

Table of Contents
loading

Table of Contents