Operation; Maintenance - Craftsman 98021 Operator's Manual

OperatiOn

always wear safety glasses. wear a filter mask if the operation is dusty. use
of rubber gloves and substantial footwear is recommended when working
outdoors. for household use only.
warning:
cut hazard. When turning the tool off for tube installation or any other reason,
wait 10 seconds for the fan to stop rotating before disassembly.
• Always switch off and remove the battery when:
• The power supply cord has become damaged or entangled.
• You leave sweeper unattended.
• Checking, adjusting, cleaning or working on sweeper.
use sweeper only in daylight or good artificial light.
switching on and off (figure d)
warning:
uSe bOth handS tO grip the prOduct firMly
when Switching On.
To switch the sweeper on, slide the on/off switch forward.
To switch the sweeper off, slide the on/off switch back.
cautiOn:
DO NOT POINT UNIT DISCHArgE AT SELF Or
BYSTANDErS.
power command (figure e)
Max pOwer / Max runtiMe
The max power / max runtime feature (E1) is located on the tool handle.
It allows you to optimize the tools performance and boost the power as
needed.
• To choose max power, rotate dial to setting 6.
• To maximize runtime rotate dial to setting 1.
• For a combination of both, rotate dial to setting from 2 to 5.
sweeper operation
cautiOn:
Always wear safety glasses. Wear a filter mask if the
operation is dusty. Use of gloves, long pants and substantial footwear is
recommended. Keep long hair and loose clothing away from openings and
moving parts. THIS SWEEPEr IS FOr HOUSEHOLD USE ONLY.
nOte: Ensure the sweeper is switched off and the battery is removed
before attaching or removing the sweeper tubes. The sweeper tube must be
assembled to the housing before use. Install battery after assembly just prior
to use.
• Hold the sweeper with one hand as shown in figure f and sweep from
side to side with the nozzle several inches above the hard surface.
Slowly advance keeping the accumulated pile of debris in front of you.

Maintenance

cleaning and StOrage
warning:
shock hazard. do not pour or spray water on the tool in an
attempt to clean.
cautiOn:
turn off and remove battery from tool.
Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the tool; never
immerse any part of the tool into a liquid. Your Sweeper should be stored in a dry place.
Do not store the tool on or adjacent to fertilizers or chemicals. Such storage can cause rapid corrosion
of the metal parts.
8
d
E
f
E1