Table of Contents
Advertisement
Available languages
Available languages
OPERATING YOUR APPLIANCE
Temperature Control and Display
• When the unit is plugged in, the display and pads will illuminate for 3 seconds and an
audible beep will be heard.
• The temperature in the left zone and right zone can be independently controlled and
displayed.
• The temperature in either zone can be controlled between 39
(The zone temperature may have a tolerance of +/-5
depending on different loading and ambient conditions).
Indicator Light
• When lit, the
and no adjustment can be made to that zone.
• When lit,
indicates that the corresponding zone is in the refrigeration cycle
(compressor is running). The indicator will go off once the desired temperature is
reached.
Note: The
light will remain on and the compressor may continue to run for
several minutes after the desired temperature is reached.
Lock and Unlock
• The lock feature is designed to prevent the settings of your wine and beverage center
from being adjusted accidentally. In order to adjust any of the settings you must
unlock the control panel by pressing the
Once the unit is unlocked, an audible beep will be heard and the
light will go out.
• If no selection is made to adjust the unit in approximately one minute, the control
panel will automatically return to the lock mode.
• To lock the unit manually, press the
lock indicator light indicates that all of the control pads are locked
o
F (+/-3
lock pad for approximately 3 seconds.
lock pad.
EN - 10
F to 65
F (4
C to 18
o
o
o
o
C) from the setting
lock indicator
10
C).
o
Advertisement
Chapters
Table of Contents
