Air Burners 300 Series Operating Manual page 14

S300 Refractory Walled Air Curtain Burner with HATZ 4H50TIC Diesel Engine
OPERATING MANUAL
HOW TO SET UP THE MACHINE (Murphy Panel)
C) STARTING
PRE-CHECKS
1. Check all belts and fluids.
2. Make sure PTO (clutch) is disengaged
(the lever in the LEFT position).
Note:
The key can only be removed from the key
switch in the OFF (O) position. Turning the key
left to the unmarked position is not functional
and is not used for your HATZ engine.
STARTING Engine
1. Turn key switch right to ON (1) position. The
display will be activated.
2. Wait for PREHEAT to complete.
3. Turn key to START(
gine is running.
4. Press THROTTLE UP button (lower right),
wait for speed to level off at 900 RPM (Idle).
5. Press THROTTLE UP button (lower right),
wait for speed to level off at 1400 RPM
(Engage Clutch)
6. Engage PTO now slowly by pushing lever
RIGHT until it snaps into place.
7. Press THROTTLE UP button (lower right),
wait for speed to level off at 2200 (S-327) or
2300 (S-330) RPM (Operating Low).
8. Press THROTTLE UP button (lower right),
wait for speed to level off at 2400 (S-327) or
2500 (S-330) RPM (Operating High).
WARNING:
Your HATZ Diesel Engine is an EPA Tier 4 FINAL certified
computer controlled engine. Do not attempt to re-program the ECM by
pressing buttons at random on the control panel. Contact Air Burners Cus-
tomer Support Department for help, if any errors have occurred.
Call 772-220-7303. Note: The engine does not require DEF.
), release, once en-
Page 10 of 29
Control Panel
DISENGAGE
PTO Lever
Clutch Handle
ENGAGE
(Vers.02.02.2021)