General Settings - Psm - JVC KD-AR390 Instructions Manual

General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table below and on page 14.
1
2
Select a PSM item.
Indications Item
( : Initial)
DEMO • DEMO ON
Display demonstration
• DEMO OFF
CLOCK DISP *
1 • CLOCK ON
Clock display
• CLOCK OFF
CLOCK HOUR 1 – 12
Hour adjustment
CLOCK MIN 00 – 59
Minute adjustment
* 1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended that you select
"CLOCK OFF" to save the car's battery.
All manuals and user guides at all-guides.com
3
4
5
Selectable settings, [reference page]
: The display demonstration will be activated automatically if no
operation is done for about 20 seconds, [6].
: Cancels.
: The clock time is shown on the display at all times when the
power is turned off.
: Cancels; pressing DISP will show the clock time for about
5 seconds when the power is turned off, [6].
[Initial: 1 (1:00)], [6].
[Initial: 00 (1:00)], [6].
Adjust the PSM item selected.
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
Finish the procedure.
Continued on the next page
13