JVC KD-AR390 Instructions Manual page 97

• This unit cannot play back the following files:
– MP3 files encoded in MP3i and MP3 PRO format.
– MP3 files encoded in an inappropriate format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded in lossless, professional, and
voice format.
– WMA files which are not based upon Windows
Media® Audio.
– WMA files copy-protected with DRM.
– Files which have data such as WAVE, ATRAC3, etc.
• The search function works but search speed is not
constant.
Changing the source
• If you change the source, playback also stops
(without ejecting the disc).
Next time you select "CD" for the playback source,
disc play starts from where it has been stopped
previously.
Ejecting a disc
• If the ejected disc is not removed within 15 seconds,
it is automatically inserted into the loading slot again
to protect it from dust.
• After ejecting a disc, "NO DISC" appears and you
cannot operate some of the buttons. Insert another
disc or press SRC to select another playback source.
Bluetooth operations
General
• While driving, do not perform complicated operation
such as dialing the numbers, using phone book, etc.
When you perform these operations, stop your car in
a safe place.
• Some Bluetooth devices may not be connected to
this unit depending on the Bluetooth version of the
device.
• This unit may not work for some Bluetooth devices.
• Connecting condition may vary depending on the
circumstances around you.
• When the unit is turned off, the device is
disconnected.
24
All manuals and user guides at all-guides.com
Warning messages for Bluetooth operations
ERROR CNNCT The device is registered but the
(Error connection has failed. Use "CONNECT"
Connection) to connect the device again. (See
page 16.)
ERROR Try the operation again. If "ERROR"
appears again, check if the device
supports the function you have tried.
UNFOUND No available Bluetooth device is
detected by "SEARCH."
LOADING The unit is updating the phone book*.
* Displays only when your cellular
phone is equipped with these
functions and is compatible with
this unit.
PLEASE WAIT The unit is preparing to use the
Bluetooth function. If the message
does not disappear, turn off and turn
on the unit, then connect the device
again (or reset the unit).
RESET 8 Check the connection between the
adapter and this unit.
iPod operations
• You can control the following types of iPods through
the interface adapter.
– iPod with dock connector (3rd Generation)
– iPod with Click Wheel (4th Generation)
– iPod mini
– iPod photo
– iPod nano *
1
– iPod video (5th Generation) *
*
1 When you connect the iPod nano to the interface
adapter, be sure to disconnect the headphones;
otherwise, no sound is heard.
*
2 It is not possible to browse video files on the
"Videos" menu while the iPod is connected to the
interface adapter.
2