JVC KD-AR390 Instructions Manual page 124

Indications
DIMMER
Dimmer
SCROLL *
2
Scroll
L/O MODE
Line output mode
SUB.W FREQ *
3
Subwoofer cutoff
frequency
EXT INPUT *
4
External input
TAG DISPLAY
Tag display
AMP GAIN
Amplifier gain control
* 2 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
* Displayed only when "L/O MODE" is set to "SUB.W."
3
* 4 Displayed only when one of the following sources is selected—FM, AM, CD, Bluetooth, or AUX IN.
14
All manuals and user guides at all-guides.com
Item Selectable settings, [reference page]
( : Initial)
• ON : Dims the display and button illumination.
• OFF : Cancels.
• ONCE : Scrolls the displayed information once.
• AUTO : Repeats scrolling (at 5-second intervals).
• OFF : Cancels.
• Pressing DISP for more than one second can scroll the display
regardless of the setting.
• REAR : Select if the REAR LINE OUT terminals are used for connecting the
rear speakers (through an external amplifier).
• SUB.W : Select if the REAR LINE OUT terminals are used for connecting a
subwoofer (through an external amplifier).
• LOW : Frequencies lower than 90 Hz are sent to the subwoofer.
• MID : Frequencies lower than 135 Hz are sent to the subwoofer.
• HIGH : Frequencies lower than 180 Hz are sent to the subwoofer.
• CHANGER : To use a JVC CD changer, [8], an Apple iPod, [19].
• EXT INPUT : To use any other external component, [21].
• TAG ON : Shows the Tag information while playing MP3/WMA tracks,
[10].
• TAG OFF : Cancels.
• LOW POWER : VOLUME 00 – VOLUME 30 (Select this if the maximum power of
the speaker is less than 50 W to prevent damaging the speaker.)
• HIGH POWER : VOLUME 00 – VOLUME 50