[Filter Counter] - Panasonic PT-MZ670L Operating Instructions Manual

[AUDIO IN 1]
[AUDIO IN 2]
[AUDIO IN 3]
[HDMI1 AUDIO IN]
[HDMI2 AUDIO IN]
[DIGITAL LINK AUDIO IN]
[NETWORK/USB AUDIO IN]
*1 Only when the input signal is HDMI1
*2 Only when the input signal is HDMI2
*3 Only when the input signal is DIGITAL LINK
*4 Only when the input signal is MEMORY VIEWER, MIRRORING, or Panasonic APPLICATION

[FILTER COUNTER]

Check the runtime of the filter and set the cleaning/replacement cycle of the filter. Also, the runtime of the filter can
be reset.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
[FILTER COUNTER]
[TIMER]
[FILTER COUNTER RESET]
Setting [TIMER]
If the filter is to be cleaned/replaced periodically, set the cycle in hours. Once the runtime of the filter reaches
the set time, a message prompting to clean/replace the filter [FILTER COUNTER has reached the set time.] is
displayed on the projected image.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
3) Press as to select [TIMER].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1000 H] - [20000 H]
Resetting [FILTER COUNTER]
Reset the runtime of the filter.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
3) Press as to select [FILTER COUNTER RESET].
4) Press the <ENTER> button.
5) The confirmation screen is displayed, so pressqw to select [OK], and press the <ENTER> button.
f Display of [FILTER COUNTER] will change to [0 H].
Chapter 4 Settings — [PROJECTOR SETUP] menu
Audio connected to the <AUDIO IN 1> terminal is output during projection of image from the set input
terminal.
Audio connected to the <AUDIO IN 2> terminal is output during projection of image from the set input
terminal.
Audio connected to the <AUDIO IN 3> terminal is output during projection of image from the set input
terminal.
Audio input to HDMI1 is output.
*1
Audio input to HDMI2 is output.
*2
Audio input to DIGITAL LINK is output.
*3
Outputs the audio of MEMORY VIEWER, MIRRORING, or Panasonic APPLICATION.
*4
Displays the runtime of the filter.
Sets the cleaning/replacement cycle of the filter.
Resets the runtime of the filter.
Select this item when a message is not to be displayed.
Select this item when a message is to be displayed. The cleaning/replacement cycle of the filter can
be set in 1 000 hour intervals.
ENGLISH - 125