30
Playback
IMPORTANT
Avoid the following actions while the card
access display
when the CARD access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
- Do not open the memory card slot cover and
do not remove the memory card.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the
switch or the operating mode.
The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
Slideshow
SLIDESHOW
FUNC.
(
23)
1
FUNC.
Press
.
2
Select (
) [
SET
press
.
3
Select (
) [START] and press
SET
.
FUNC.
Press
to stop the slideshow.
Index Screen
1
Move the zoom lever toward W.
The index screen appears.
2
Select (
) an image.
• Move the cursor
you want to view.
-
+
• Press
or
previous index page.
3
Move the zoom lever toward T.
The index screen closes and the
selected image is displayed.
appears on screen, and
/
SLIDESHOW] and
to the image
to move to the next/
Magnifying the Playback Image
During playback, movies and still images
can be magnified up to 5 times. You can
also select the area to be magnified.
1
Move the zoom lever toward T.
• The image is magnified by 2 times
and a frame appears indicating the
position of the magnified area.
• To further enlarge the image, move
the zoom lever toward T. To reduce the
magnification, move the zoom lever
toward W.
•
will appear for images that cannot
be enlarged.
2
Select the enlarged area of the
picture with the
• Move (
) the frame right/left or up/
SET
down. Press
the directions.
• To cancel the magnification, move
the zoom lever toward W until the
frame disappears.
(
10)
SET
dial.
to change between