Canon HV10 Instruction Manual page 33

made in LP mode. We recommend using
the SP mode for important recordings.
If you make recordings in both SP and
LP modes on the same tape, during
playback you may notice some video
problems in the picture at the point where
the recording mode changes.
When playing back in this camcorder
tapes recorded in LP mode with other
devices or vice versa, you may notice
some problems in the playback picture or
the sound may stop briefly.
DV AUDIO
[ 16bit], [
When [HD STANDARD] is set to one of
the DV standards you can change the
audio quality.
[ 16bit]: To record sound at the
highest quality.
[ 12bit]: If you will dub audio or add a
music track later with an external device.
WIND SCREEN
Mode switch:
[ AUTO], [ OFF
The camcorder automatically reduces the
background sound of wind when
recording outdoors.
The wind screen cannot be turned off
when the mode switch is set to
REVIEW
[ OFF], [ 2sec], [
[ 6sec], [ 8sec], [
Selects the time to display a still image
after it has been recorded.
DV
12bit]
]
.
4sec],
10sec]
Menu Options Lists
You can erase (
( 55) the image if you press
while you are reviewing the image (or
immediately after recording it, if set to
[ OFF]).
This menu item will not be available
when (continuous shooting),
(high-speed continuous shooting) or
(auto exposure bracketing) is
selected.
If you press DISP.
still image, it will continue to be displayed
PHOTO
indefinitely. Press
return to the normal display.
AV DV
[ ON], [ OFF]
FILE NOS.
[ RESET], [ CONTINUOUS]
Select the image numbering method to be
used when you insert a new memory
card.
Images are automatically assigned
consecutive image numbers from 0101 to
9900, and stored in folders containing up
to 100 images. Folders are numbered
from 101 to 998.
[ RESET]: Image numbers will restart
from 101-0101 every time you insert a
new memory card.
[ CONTINUOUS]: Image numbers will
continue from the number following that
of the last image recorded with the
camcorder.
If the memory card you insert already
contains an image with a larger number, a
new image will be assigned a number one
higher than that of the last image on the
memory card.
33
55) or protect
FUNC.
while reviewing a
half way to
( 63)
E