Technical Characteristics - Maxwell MW-3004 B Manual Instruction

Hide thumbs Also See for MW-3004 B:

Manual instruction (41 pages)

Table Of Contents

Table of Contents

Available languages

the "min" position and the steam supply regu-

lator (3) to the off steam position.

• Pull the plug out of the socket and let the iron

cool down completely.

ATTENTION!

If during the operation steam is not constantly

supplied, check whether the temperature regula-

tor (11) is set properly.

ADDITIONAL STEAM RELEASE

Additional steam release function is useful when

ironing folds and can only be used at high ironing

temperatures (when the iron temperature regula-

tor (11) is set to "•••" or "max").

• When the additional steam release button (5) is

pressed, steam will be vigorously released from

the openings in the iron sole.

Note: In order to avoid leakage of water from

steam openings, press the additional steam

supply button (5) with 4-5 sec. interval.

STEAM CHAMBER CLEANING

To prolong lifetime of the iron we recommend

cleaning the steam chamber, especially in the re-

gions with "hard" water.

• Fill the water tank (10) till the MAX mark (12).

• Put the iron on the base (8).

• Insert the power plug into the outlet.

• Set the temperature regulator (11) to the MAX.

temperature: "max" the (9) indicator will light up.

• When the sole temperature (13) reaches the de-

sired temperature value, the (9) indicator will go

out, you can start cleaning of the iron chamber.

• Unplug the iron, set the temperature regulator

(11) to the «MIN» position.

• Pull the plug out of the socket.

• Hold the iron above the sink, set and hold the

regulator (3) to the position – SELF CLEAN.

• Boiling water together with scale will be throw-

ing out from the openings in the iron sole (13).

• Slightly sway the iron back and forth, until water

goes out of the water tank (10).

• Place the iron on the base (8) and let it cool

down completely.

• When the sole (13) cools down completely, wipe

it with a dry cloth.

• Before you take the iron for storing, make sure

that there is no water in the water tank (10) and

that the iron sole (13) is completely dry.

MW-3004_correct.indd 11

CARE AND CLEANING

• Before cleaning the iron, make sure that it is

turned off and has cooled completely.

• Wipe the iron's outer surface with a damp cloth

and then wipe dry.

• Sediment on the iron sole can be removed with

a cloth soaked in vinegar-water solution.

• After removing sediment, polish the sole with a

dry cloth.

• Do not use abrasive substances to clean the

sole and body of the iron.

• Avoid touching the iron sole with sharp metal

objects.

STORAGE

• Turn the temperature regulator (11) anticlock-

wise till MIN position, set the steam release

regulator (3) to the position - steam release OFF

position.

• Remove the power plug from the outlet.

• Open the water tank lid (2), turn over the iron and

drain any remaining water from the water tank (10).

• Close the lid (2).

• Set the iron vertically and allow it to cool com-

pletely.

• Store the iron vertically.