Page 1
Spectralink Versity Smartphones RingCentral Office Interoperability Guide 721-0085-000 Rev: A August 2021...
Page 2
The drawings and specifications contained herein are the property of Spectralink and shall be neither reproduced in whole or in part without the prior written approval of Spectralink, nor be implied to grant any license to make, use, or sell equipment manufactured in accordance herewith.
Chapter 2: Configure the RingCentral Office Call Server ... 7 Configure TLS settings in RingCentral Admin Portal..........7 Assign an Existing Device to an Existing Extension ..........8 Chapter 3: Spectralink Versity Biz Phone Configuration ..11 721-0085-000_A.docx August 2021...
Chapter 1: About This Guide This guide describes how to configure a Spectralink Versity smartphone for connecting to RingCentral Office. This guide is intended for qualified technicians and the reader is assumed to have a basic knowledge about the Spectralink Versity smartphones and RingCentral Office. It is also assumed that you have an installed and functioning RingCentral Office and Spectralink Versity smartphones ready to provision and deploy.
Spectralink Versity Interoperability Guide—RingCentral Supported features Description/Setting Caller ID Display Caller ID information for incoming and outgoing calls. Call Hold and Retrieve Allows user to place active calls on hold. Call Transfer (warm, blind) Allows user to transfer the active call to some other number.
Setup & Maintenance tab Spectralink Technical Bulletins Technical Bulletins tab Release Notes Setup & Maintenance tab Spectralink Training Material To gain access to the Spectralink training material, you must attend training and become Spectralink Certified Specialist. Please visit http://partneraccess.spectralink.com/training/classroom- training for more information and registration.
Chapter 2: Configure the RingCentral Office Call Server Configure TLS settings in RingCentral Admin Portal For TLS setup, each existing device must be set to support TLS. Login in RingCentral Admin Portal Go to Phone System TAB Expand Phone&Device Menu Select User Phones SubMenu Click on the target Device Enter in Setup&Provision...
Spectralink Versity Interoperability Guide—RingCentral Assign an Existing Device to an Existing Extension To add an existing device to an existing user, do the following: Log in as an Administrator to your RingCentral Online Account. Under Admin Portal, click Users, click User List, click Users With Extensions and select the desired User.
Page 9
Spectralink Versity Interoperability Guide—RingCentral You can now see information about added devices and order summary. Assign a phone number to the device: ○ If you already have an existing number, click Existing Number to add it to the device. ○ If you want to add a new number to the device, click New Number, and then select the desired number.
Page 10
Spectralink Versity Interoperability Guide—RingCentral Follow the steps to complete the process. Click Done when finished. When complete, the new Existing Device is displayed under the selected user account. Continue setting up new user phones if needed. 721-0085-000_A.docx August 2021...
Chapter 3: Spectralink Versity Biz Phone Configuration The Versity smartphones use the Spectralink Versity Biz Phone application for telephony interoperation with the RingCentral Office call server. Each Versity smartphone must be configured with extension number, username and password. Additional SIP settings are required for SIP server, SIP server port, TLS transport protocol and SRTP enabled.
Page 12
Spectralink Versity Interoperability Guide—RingCentral Enable SIP option Registration 1 option Registration 1 menu *****END OF DOCUMENT***** 721-0085-000_A.docx August 2021...
Need help?
Do you have a question about the Versity and is the answer not in the manual?
Questions and answers