Installation; Opening The Cover - Matsuko Switch Box Installation And Operating Manual

DIMENSIONS
226 mm
Output
Max. Power Per Line*
Max. Total Output
Programmable
Number of Lines
Model Number
Internal Fuses
Double Layer Capacitor**
Pump Guard + Power consumption
* 1500 Watts per line when installed into the mains household electrical wiring using appropriate cable.
** A double layer capacitor stores electrical energy to remember your programs in case of a power cut for at least 24 hrs
when fully charged. The Matsuko double layer capacitors need minimum 48 hours to be fully charged.
Page 6
70 mm
Switch Switch Box Switch Box
Box Timer Timer + PG
220/240 V 220/240 V 220/240 V
1500 W 1500 W 1500 W
3000 W 3000 W 3000 W
–
5 Lines 5 Lines 5 Lines
Switch Box Switch Box Timer Switch Box Timer + PG
6.3A G-Fuse 5 mm x 20 mm
–
– –

INSTALLATION

(PLEASE SEE SEPARATE SHEET FOR WALL MOUNT INSTRUCTIONS)
WARNING: ALWAYS TURN THE SWITCH BOX POWER
OFF AT THE MAINS ELECTRIC BEFORE OPENING
THE COVER. ALWAYS SECURE WITH CLOSING SCREW.

OPENING THE COVER

To open the cover insert a small
screwdriver (1) or similar implement into
the round opening at the base of the
cover.
Use it to push the fastening connection
towards the left until the catch is released
(2). Gently lift the cover open to the
maximum angle of 100 degrees (3). DO
NOT force the cover to open further.
Once you have connected all your
appliances (see page 8), always secure
the lid with the closing screw (the closing
screw is packed together with the 2
blanking plugs).
1
Locking Screw
2
max. 100 o!
3
Page 7