Removing Devices; Delete - Siemens Sentron 7KN POWERCENTER 1000 Manual

Commissioning

5.3 Removing devices

5.3 Removing devices
5.3.1

Delete

Added devices can be deleted from the list view of the project in the software. In the app, this
can only take place in the project view via the gear icon to the right of a
7KN Powercenter 1000. This means that this can no longer be displayed in the project. If the
7KN Powercenter 1000 is selected, the devices continue to be paired and are displayed in the
list of connected devices. The terminal devices are disconnected from the
7KN Powercenter 1000 or from this mobile device only by resetting communication by
pressing the button on the devices or by using the powerconfig decoupling function.
If a device was deleted, it does not need to be rescanned, selecting it in the
7KN Powercenter 1000 view of paired devices is enough. This devices is then displayed in the
project view once again.
Android
44
iOS
Circuit protection devices with communication and metering function
System Manual, 06/2021, L1V30827018B-01