Preparing Installation; Checking Delivery - Siemens Sentron 7KN POWERCENTER 1000 Manual

Installation and connection

4.1 Preparing installation

4.1 Preparing installation
4.1.1

Checking delivery

Procedure
1. When you receive the delivery, check the packaging for visible damage in transit.
2. If you discover damage in transit, lodge a complaint with the carrier responsible.
Have the carrier confirm the damage in transit immediately.
3. Unpack the device at its destination.
4. Keep the original packaging for reshipping the device. See information on damage.
5. Check that the package contents are complete and undamaged.
20
NOTICE
Damage to the device during transportation and storage
If a device is transported or stored without packaging, shocks, vibrations, pressure and
humidity act on the unprotected device. Damaged packaging is an indication that the
environmental conditions have already had a large impact on the device.
The device may be damaged.
Do not dispose of the original packaging. Pack the device for transportation and storage.
Circuit protection devices with communication and metering function
System Manual, 06/2021, L1V30827018B-01