2.3
Cautions on Transporting the Robot
The clean type robot equals the standard robot added with two (2) bellows. The
precautions to be taken at transport are stated below. The precautions other than the
below are the same as in the standard robot. For details, see the
TH450A/TH550A/TS3000 Installation and Transportation Manual or the
THP550/TS3000 Installation and Transportation Manual provided separately.
DO NOT hold the
upper bellows.
DO NOT hold the
lower bellows.
DO NOT hold the tool flange and
ball screw spline shaft.
Fig. 2.4 Robot handling prohibited areas
– 21 –
CLEAN TYPE SPECIFICATIONS MANUAL
DO NOT hold the arm 2
cover.
DO NOT hold the
duct.
Handling areas
(shaded areas)
DO NOT hold the
connectors.
STE 80872-0