Basic Recording; Taking Photos; Selecting Photo Size And Quality - Canon FS30 Instruction Manual

Photos
Refer to this chapter for details on shooting photos – from capturing
and playing back photos to printing them.

Basic Recording

Taking Photos

1
Set the camera mode dial to
.
2
Turn on the camcorder.
You can select the
/
memory to be used for recording
photos ( 30).
3 PHOTO
Press halfway.
Once the focus is automatically
adjusted, will turn green and one
or more AF frames will appear.
4
Press
The ACCESS indicator will flash as
the photo is being recorded.
IMPORTANT
Observe the following precautions while
ACCESS
the
Failing to do so may result in permanent
data loss.
- Do not open the memory card slot cover.
( 24)
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the operating mode.
NOTES
If the subject is not suitable for autofocus,
turns yellow. Adjust the focus manually
( 49).

Selecting Photo Size and Quality

Photos are recorded as JPG files. As a
or
general rule, select a larger photo size
for higher quality.
Options
Photo size options and the approximate
number of photos that can be recorded
on memory cards of various sizes are
given in the following sidebar.
PHOTO
fully.
indicator is on or flashing.
( 24)
57