Canon FS30 Instruction Manual page 85

[DEMO MODE]: The demonstration mode displays the camcorder's main features. It starts
automatically when the camcorder is powered with the compact power adapter if you
leave it turned on for more than 5 minutes.
• To cancel the demo mode once it has started, press any button or turn off the
camcorder.
System Setup (Speaker Volume, Beep, etc.)
SYSTEM SETUP
Menu item
[BATTERY INFO]
[BEEP]
[POWER SAVE]
[QUICK START]
[SPEAKER VOL.]
[TV TYPE]
[USB SETTING]
[ADD TO DISC]
[PHOTO NOS.]
[FIRMWARE]
[BATTERY INFO]: Displays a screen where you can verify the battery charge (as a
percentage) and the remaining recording time (
( , mode).
[BEEP]: A beep will accompany some operations like turning on the camcorder, the self-
timer countdown, etc.
[POWER SAVE]: In order to save power when the camcorder is powered by a battery
pack, it will automatically shut off if left without any operation for 5 minutes.
• Approximately 30 seconds before the camcorder shuts off, [AUTO POWER OFF] will appear.
• In standby mode, the camcorder will shut off after the time selected for the [QUICK
START] setting.
• The Power Save mode cannot be set while the compact power adapter is connected to
the camcorder.
[QUICK START]: Select whether to activate the Quick Start function (
close the LCD panel in a recording mode and the length of time after which the camcorder
will end the standby mode and shut off automatically.
Setting options
–
[ HIGH VOLUME],
[ LOW VOLUME], [
[ ON], [ OFF]
[ OFF], [ 10 min],
[ 20 min], [
[ NORMAL TV], [
[ DVD BURNER], [ PC/PRINTER],
[ CONNECT&SET]
[ALL SCENES], [REM.SCENES],
[PLAYLIST]
[ALL PHOTOS], [ TRANS.ORD]
[ RESET], [ CONTINUOUS]
–
OFF]
30 min]
–
WIDE TV] –
–
–
–
–
–
, mode) or playback time
–
–
–
– – –
– –
– –
– –
– – 73
– – 73
– –
– – –
35) when you
85