Canon FS30 Instruction Manual page 89

Deleting scenes takes longer than usual.
- When the memory contains a large number of scenes, some operations may take longer than usual. Save
your recordings (
Cannot erase a photo
- The photo is protected. Remove the protection (
Cannot play back a music track.
- If the music tracks were erased when the memory was initialized, transfer music files back to the memory.
Windows users: Use the supplied software Music Transfer Utility to transfer the music files on the supplied
Instruction Manual/Music Data Disc CD-ROM. For details, refer to the software's instruction manual (PDF
file). Mac OS users: Use the Finder to transfer the music files on the supplied Instruction Manual/Music
Data Disc CD-ROM. Refer to
When playing back recordings combined with music, the video and audio do not play back correctly (playback
skips or stops).
- This occurs when music files are transferred and there is not enough available space in the memory (about
5 times more than the size of the music files). Make sure there is enough space and then transfer the music
files again.
When playing a slideshow, it takes longer than usual for the photos to advance or there are brief stops in the
audio.
- This may occur when using a memory card with no Speed Class rating or playing back photos recorded with
another device. Play back photos taken with this camcorder from a memory card rated Speed Class 2 or
higher.
Indicators and Onscreen Displays
lights up in red.
- Battery pack is exhausted. Replace or charge the battery pack (
appears on the screen.
- The camcorder cannot communicate with the battery pack attached so the remaining battery time cannot be
displayed.
lights up in red.
- A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory card. Initialize the
memory card (
- The memory card is full. Replace the memory card or delete some recordings (
on the memory card.
The ON/OFF(CHG) (power/charge) indicator flashes rapidly while the camcorder is charging.
-
Charging has stopped because the compact power adapter or the battery pack is faulty. Consult a Canon
Service Center.
The ON/OFF(CHG) (power/charge) indicator flashes very slowly while the camcorder is charging.
-
The battery pack's temperature has either fallen below 0 °C (32 °F) or risen above 40 °C (100 °F). If the
72) and initialize the memory (
Music Files
(
31) if the display does not change back to normal.
(one flash at 0.5-second intervals)
(one flash at 2-second intervals)
31).
63).
103) for folder structure of the memory and CD-ROM.
19).
41, 61) to free some space
89