Preparing The Accessories - Canon FS30 Instruction Manual

• To prevent equipment breakdowns and
excessive heating, do not connect the
supplied compact power adapter to
voltage converters for overseas travels
or special power sources such as those
on aircraft and ships, DC-AC inverters,
etc.
NOTES
• Turn off the camcorder before charging
the battery pack. The battery pack will
not charge while the camcorder is on.
• If remaining battery time is an issue, you
can power the camcorder using the
compact power adapter so the battery
pack will not be consumed.
• Charged battery packs continue to
discharge naturally. Therefore, charge
them on the day of use, or the day
before, to ensure a full charge.
• We recommend that you prepare battery
packs to last 2 to 3 times longer than
you think you might need.
• USA and Canada only: The
Lithium ion/polymer battery
that powers the product is
recyclable. Please call
1-800-8-BATTERY for
information on how to recycle
this battery.

Preparing the Accessories

Fasten the grip belt.
Adjust the grip belt so that you can
reach the zoom lever with your index
Start/Stop
finger, and the
your thumb.
T
O REMOVE THE GRIP BELT
1 Lift the padded handgrip's flap
and detach the strap from the
Velcro pad.
2 Pull the strap to remove it first
from the front bracket on the
camcorder, then to unthread it
from the handgrip and finally to
remove it from the rear bracket on
the camcorder.
button with
21