Canon FS30 Instruction Manual page 97

NO TRANSFER ORDERS
- You selected to create a DVD with the [TRANS.ORD] setting, but no photos have been marked with transfer
orders ( 75).
OPERATION CANCELED
- The USB cable was disconnected and the operation was canceled. Check the USB connection.
UNABLE TO RECOVER DATA
- Could not recover a corrupted file.
Direct Print Related Messages
CANNOT PRINT!
- You attempted to print a photo that was recorded with another camcorder, has a different compression, or
was edited on a computer.
CHECK PRINT SETTINGS
- Current print settings cannot be used for printing with the
COMMUNICATION ERROR
- The printer is experiencing a data transfer error. Cancel printing, disconnect the USB cable and turn off the
printer. After a while, turn the printer back on and reconnect the USB cable. When you are printing using the
button, check the print settings.
Or, you attempted to print from a memory card that contains a large number of photos. Reduce the number of
photos.
COULD NOT PRINT X PHOTOS
- You attempted to use the print order settings to print X photos that were recorded with another camcorder,
with a different compression or were edited on a computer.
FILE ERROR
- You attempted to print a photo that was recorded with another camcorder, has a different compression, or
was edited on a computer.
HARDWARE ERROR
- Cancel printing. Turn off the printer and turn it back on. Check the printer status. If the printer is equipped with
a battery, it might be exhausted. In such case, turn off the printer, replace the battery and turn it back on.
INCOMPATIBLE PAPER SIZE
- The paper settings of the camcorder conflict with the printer's settings.
INK ABSORBER FULL
- Select [CONTINUE] to resume printing. Consult a Canon Service Center (refer to the list included with the
printer) to replace the ink absorber.
INK ERROR
- There is a problem with the ink. Replace the ink cartridge.
LOW INK LEVEL
- The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart printing.
NO INK
- The ink cartridge is not inserted or is out of ink.
button.
97