Canon FS30 Instruction Manual page 88

Additional Information
After using the camcorder for a long time, it becomes hot.
- The camcorder may become hot after using it continuously for long periods of time; this is not a malfunction.
If it becomes hot very quickly or it becomes too hot to touch, it may indicate a problem with the camcorder.
Consult a Canon Service Center.
The battery pack is exhausted extremely quickly even at normal temperatures.
- The battery may have reached the end of its battery life. Buy a new battery pack.
Recording
Pressing Start/Stop will not start recording.
- You cannot record while the camcorder is writing previous recordings onto the memory (while the ACCESS
indicator is on or flashing).
- The memory is full or it already contains 3,999 scenes (the maximum number of scenes). Delete some
recordings ( 41) or initialize the memory (
The point where Start/Stop
- There is a slight interval between pressing
malfunction.
- When the pre-recording function is used, the beginning of the scene will differ from when
pressed.
The camcorder will not focus.
- Autofocus does not work on the subject. Focus manually (
- Lens is dirty. Clean the lens with a soft lens-cleaning cloth (
When a subject flits across in front of the lens, the image appears slightly bent.
- This is a phenomenon typical of CMOS image sensors. When a subject crosses very quickly in front of the
camcorder, the image may seem slightly warped. This is not a malfunction.
Changing the operating mode between recording (
usual.
- When the memory contains a large number of scenes, some operations may take longer than usual. Save
your recordings (
Movies or photos cannot be recorded properly.
- This may occur as movies and photos are recorded/deleted over time. Save your recordings (
initialize the memory (
Playback
Cannot add scenes to the playlist.
- The playlist cannot contain more than 99 scenes or 100 hours of scenes.
- You may not be able to add scenes to the playlist if they were recorded or edited using another device.
Cannot delete a scene.
- You may not be able to delete scenes recorded or edited using another device.
88
was pressed does not match the beginning/end of the recording.
Start/Stop
72) and initialize the memory (
31).
31) to free some space.
and the actual start of recording. This is not a
).
49
). Never use tissue paper to clean the lens.
102
)/record pause ( )/playback (
31).
Start/Stop was
) takes longer than
72) and