Moving The Pump Unit With A Forklift - UPRENT impulse MUMBAI IP Series User Manual

Table of Contents

Advertisement

DANGER
The standard lifting eyes on Impulse pump units, both in low-noise enclosure and
open frame, are NOT designed to lift the additional weight of trailers or other
components. It is strictly forbidden to use the standard lifting provision to lift or move
the pump units with a higher total weight than stated in the specification sheets. This
can result
in a life-threatening situation.
3.1

Moving the pump unit with a forklift

Forklift pockets can be used for moving the pump unit with a forklift. The forks of the forklift
must be inserted into these pockets to lift the pump unit.
WARNING
Use certified lifting equipment with an adequate lifting capacity and always lift from
directly above. Lifting from an angle can lead to dangerous situations.
Lifting work may only be performed by appropriately authorised personnel.
Because many different versions of the pump unit are available, only general
instructions are provided. See the specification sheet for the particular pump unit for
the weight and dimensions.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mumbai ip 175

Table of Contents