Accessories; Technical Description - Dometic AH Series Installation And Operating Manual

Accessories

5 Accessories
Available as accessories (not included in the scope of delivery):
Description
Display cable – available from 0.6 m to 22.9 m (2 ft to 75 ft)
Outside air temperature sensor
Alternate air temperature sensor
All the accessories are available from specialist dealers. If you have any questions,
please contact the dealer or your service partner directly.
6

Technical description

AH-Elite Control display contains a five-volt logic and microcontroller, an air temper-
ature sensor and nonvolatile memory to retain the settings without power supply.
The front of the control unit contains the following information and control
instruments:
• A three-digit, seven-segment display panel which shows temperatures, parame-
ters or other values
• LED-indicators for fan speed and operating mode
• Five buttons for the operation of the device
AH-Elite Control unit can be used in one of the following modes:
• Automatic mode: keeps the room temperature at the preselected temperature
by either heating or cooling
• Cool mode: only cooling is provided, no heating
• Heat mode: only heating is provided, no cooling
• Moisture mode: the system only controls the relative humidity, not the tempera-
ture
• Fan-only mode: the fan runs to provide air circulation without heating or cooling
The fan-speed can be set to automatic or manual mode. In manual mode three fan
speeds are available: high, medium and low speed. In addition the user can choose
between cycled or continuous fan operation while the system is switched on. In
cycled fan operation the fan only runs during heating or cooling intervals. When con-
tinuous fan operation is selected the fan runs as long as the system is switched on.
10
AH-Elite Control
EN