Edimax AR-7084gA/B User Manual page 48

Dynamic IP Address/Static IP Address/PPPoE/PPPoA/Bridge Mode
After you have selected the ISP Type, this web page will be varied depending on
the ISP Type you select. You have to continue setting some parameters. Please
refer to the following table for the explanation of each parameter.
Parameter
User Name
Password
Encapsulation
Bridge Interface
Connection
Description
Enter the username exactly as your ISP assigned.
Enter the password that your ISP has assigned to you.
Please check with your ISP the method of multiplexing.
In Bridge Mode, please select "1483 Bridge IP LLC" or
"1483 Bridge IP VC-Mux". In PPPoE/PPPoA mode,
please select "PPPoE LLC", "PPPoE VC-Mux", "PPPoA
LLC", or "PPPoA VC-Mux".
This router has built-in ADSL modem and is able to
connect to ISP directly. Alternatively, if you want to use
the dial up software to manually connect to the ISP, you
have to activate the "Bridge Interface".
Always On – The connection will be kept always on. If
the connection is interrupted, the router will re-connect
automatically.
Connect On-Demand – Only connect when you want to
surf the Internet. "Close if idle for xx minutes" is set to
stop the connection when the network traffic is not
sending or receiving after an idle time.
Connect Manually – After you have selected this option,
please go to Status page. You will see the "Connect"
button, click it and the router will connect to the ISP. If
you want to stop the connection, please click
"Disconnect" button.
40