Page 2
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd.
Page 3
Č š a : Českého průvodce rychlou instalací naleznete na přiloženém CD s š ovladači : Finden Sie bitte das deutsche S.A.L. beiliegend in der Treiber CD ñ l : Incluido en el CD el G.R.I. en Español. ñ : Veuillez trouver l’français G.I.R ci-joint dans le CD ç...
PRODUCT INTRODUCTION Package Contents Before you start using this product, please check if there is anything missing in the package and contact your dealer to claim the missing item(s): ADSL2+ router (AR-7186WnA or AR-7186WnB) 12V power adapter 1 meter RJ-45 Ethernet cable ...
Page 5
Color Status Description Power Green ADSL2+ router is on. ADSL2+ router Is off. ADSL broadband initial self-test failed or upgrading firmware. ADSL Green ADSL line is synchronized and ready to use. Slow Flashing ADSL synchronization failed ( please refer to Note i.
Page 6
If the Internet LED is red, please check your ADSL LED first. If the ADSL LED is off, refer to Note 1. If the green ADSL LED is ON, please check your Internet configuration. You may need to check with your ISP that your Internet is configured correctly.
Item Description WPS Button Activate WPS (Wi-Fi Protected Setup) LAN 1–4 RJ-45 Ethernet ports 1–4. Hold for less than 5 seconds to restart the device, and hold for more Reset Button than 10 seconds to reset the device to factory default settings. Line RJ-11 port for standard telephone line.
Page 8
Check the ADSL LED status. Please check the ADSL LED on the front panel. This light indicates the status of your ADSL broadband through your telephone line. If the light is on, you can continue setup. However if the light is flashing, there is no broadband line detected.
Page 9
Click “Switch to Classic View” in the top left to show additional setting icons. Locate the “Network Connections” icon and double-click to open network connection settings. Select the “Local Area Connection” icon and right-click it to open the sub-menu, then select “Properties”.
Page 10
Select “Internet Protocol (TCP/IP)” and then click “Properties” Ensure that “Obtain an IP address automatically” and “Obtain DNS server address automatically” are selected and then press “OK”.
B. Internet Connection You can configure the router by running the setup wizard on the CD-ROM included in the package contents. The wizard enables you to configure your Internet connection, upgrade the firmware and change the router’s password. When you start the setup wizard, you will see the following screen.
Page 12
2. The login screen below will appear. Enter the default username “admin” and default password “1234” and click “OK”. 3. You will arrive at the system status page as shown below. 4. In the navigation bar across the top of the screen, click “Quick Start” and then “RUN WIZARD”.
Page 13
5. Follow the on screen instructions until the wizard is complete.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2009/125/EC. French: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 1999/5/CE, 2009/125/CE Czechian: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 1999/5/ES, 2009/125/ES.
Declaration of Conformity We, Edimax Technology Co., LTD., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Council directive (1995/5/EC, 2006/95/EC). Equipment : N150 Wireless ADSL Modem Router Model No. : AR-7186WnA & AR-7186WnB...
Need help?
Do you have a question about the AR-7186WnA and is the answer not in the manual?
Questions and answers