Gree Livo GEN3 LIVV30HP230V1A Service & Parts Manual page 23

Replacement of batteries in remote controller
1. Press the back side of remote controller marked with "
out the cover of battery box along the arrow direction.
2. Replace two 7# (AAA 1.5V) dry batteries, and make sure the position of "+" polar and "-" polar
are correct.
3. Reinstall the cover of battery box.
Note:
During operation, point the remote control signal sender at the receiving window on indoor unit.
The distance between signal sender and receiving window should be no more than 8m, and there should be no obstacles between them.
indoor unit during operation.
Replace new batteries of the same model when replacement is required.
When you dont use remote controller for a long time, please take out the batteries.
If the display on remote controller is fuzzy or theres no display, please replace batteries.
20
signal sender battery
reinstall
remove
Cover of battery box