Gree Livo GEN3 LIVV30HP230V1A Service & Parts Manual page 21

6. ▲/ button
Press "▲" or " " button once increase or decrease set temperature 1 (1°F) . Holding "▲" or "
remote controller will change quickly. On releasing button after setting is finished, temperature indica- tor on indoor unit will change
accordingly. (Temperature can't be adjusted under auto mode)
When setting TIMER ON, TIMER OFF or CLOCK, press "▲" or "
buttons)
7. SLEEP button
Under COOL, HEAT or DRY mode, press this button to start up sleep function. "
again to cancel sleep function and "
8. TEMP button
By pressing this button, you can see indoor set temperature, indoor ambient temperature or outdoor ambient temperature on indoor units
display. The setting on remote controlleris selected circularly as below:
When selecting " " or no display with remote controller, temperature indicator on indoor unit displays set temperature.
When selecting " " with remote controller, temperature indicator on indoor unit displays indoor ambient temperature.
When selecting " " with remote controller, temperature indicator on indoor unit displays outdoor ambient temperature.
Note:
Outdoor temperature display is not available for some models. At that time, indoor unit receives "
temperature.
Its defaulted to display set temperature when turning on the unit.There is no display in the remote controller.
Only for the models whose indoor unit has dual-8 display.
When selecting displaying of indoor or outdoor ambient temperature, indoor temperature indicator displays corresponding temperature and
9. WIFI button
Press " WiFi " button to turn on or turn off WiFi function. When WiFi function is turned on, the " WiFi " icon will be displayed on remote
controller; Under status of remote controller off, press "MODE" and " WiFi " buttons simultaneously for 1s,WiFi modulewill restore to factory
default setting.
10. LIGHT button
Press this button to turn off display light on indoor unit. "
display light. " " icon is displayed.
11. CLOCK button
Press this button to set clock time. "
pressing of "▲" or " " button, clock time will increase or decrease 1 minute. If hold "▲" or "
Note:
Clock time adopts 24-hour mode.
The interval between two operation cant exceeds 5s. Otherwise, remote controller will quit setting status. Operation for TIMER ON/TIMER
OFF is the same.
12. TIMER ON / TIMER OFF button
TIMER ON button
"TIMER ON" button can set the time for timer on. After pressing this button, "
blinks. Press "▲" or " "button to adjust TIMER ON setting. After each pressing "▲" or "
decrease 1min. Hold "▲" or "
started up, press "TIMER ON" button to cancel it.
TIMER OFF button
"TIMER OFF" button can set the time for timer off. After pressing this button,"
controller blinks. Press "▲" or "
TIMER OFF setting will increase or decrease 1min. Hold "▲" or "
required time. Press "TIMER OFF" word "OFF" will stop blinking. "
that TIMER OFF is started up, press "TIMER OFF" button to cancel it.
" icon will disappear.
no display
" icon on remote controller will blink. Press "▲" or "
" button, 2s later, the time will change quickly until reaching your required time. Press "TIMER ON" to
" icon resumes displaying. Cancel TIMER ON: Under the condition that TIMER ON is
" button to adjust TIMER OFF setting. After each pressing "▲" or "
" button to adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF
" icon is displayed on remote controller. Press this button
" icon on remote controller disappears. Press this button again to turn on
" icon disappears and the word "ON" on remote controller
" button, TIMER ON setting will increase or
" icon disappears and the word "OFF" on remote
" button, 2s later, the time will change quickly until reaching your
" icon resumes displaying. Cancel TIMER OFF. Under the condition
18
" button, 2s later, set temperature on
"signal, while it displays indoor set
" button within 5s to set clock time. Each
" button, 2s later, time will change quickly.
" icon stops blinking.
" button,