Blaupunkt TravelPilot Rome Europe NAV56E Operating And Installation Instructions page 20

Table of Contents

Advertisement

Basic settings before the trip
Adjust the switch-on volume to
a low value!
Change the volume by turning
the menu button < to the left
or right and press the OK but-
ton =.
The currently playing source is
played with the selected volume.
The volume control displays the
volume.
Adjusting the control of the
display brightness
You adjust the following in the
"Display" menu:
Whether the display automati-
cally switches off when you are
not operating the device (Display
off),
whether the display brightness
is automatically adjusted (Auto/
Day/Night mode),
the brightness with switched-off
headlights (Brightness day) ,
the brightness with switched-on
headlights (Brightness night ).
To adjust the setting of the display
brightness:
In the "System" menu, select
and confi rm the "Display" menu
item.
The display menu appears.
Display off
Display off
Mode AUTO
Mode AUTO
20
Setting the Language
Display
Display
You adjust the following in the
"Language" menu:
Brightness day
Brightness day
Brightness night
Brightness night
Select and confi rm the desired
menu item in the display menu
("Display off", "Mode", "Brightness
day" or "Brightness night").
The corresponding setting ap-
pears.
If you activate "Display off" with
the OK button =, the display
automatically switches off 10
seconds after the last push of
a button. To switch it back on
again, press any button.
If you select "Mode", you can
use the OK button = to select
among "Auto" (automatically
changing the brightness), "Day"
and "Night".
You use the menus "Brightness
day" and "Brightness night"
to adjust the desired display
brightness with headlights
switched on or off by using the
menu button <.
Note:
If your vehicle features a control
for instrument lighting, you can
also use it to toggle the display
brightness between "Brightness
day" and "Brightness night".
For the device to recognise that
the headlights are switched on,
the corresponding signal must be
connected.
The language of the texts on the
display,

Advertisement

Table of Contents
loading

Table of Contents