Table of Contents
Advertisement
Available languages
Available languages
Programme
P5
Delicate
P6
5)
Rinse and Hold
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
2) This programme offers the most efficient use of water and energy consumption for crockery and cutlery
with normal soil. This is the standard programme for test institutes.
3) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts
the temperature and quantity of water, energy consumption and programme duration.
4) This programme is suitable for washing a load or a half load with fresh or light soil in a short time.
5) With this programme, you can quickly rinse off food remains from dishes and prevent odours forming in
the appliance. Do not use detergent with this programme.
SETTINGS
PROGRAMME SELECTION MODE
In the programme selection mode it is possible to
set a washing programme and to enter the user
mode to change the appliance settings.
To enter the programme selection mode, press on/
off.
The appliance is in programme selection mode
when, after activation, the display shows the
number of the programme Eco. The programme
duration appears on the display a couple of
seconds after.
If the control panel does not indicate that the
appliance is in programme selection mode,
implement the CANCEL procedure.
CANCEL FUNCTION
Use CANCEL to:
•
CANCEL the currently running programme.
•
Stop the countdown of the Delay option.
22
Degree of soil
Programme phases
Type of load
Normal or light
soil
Delicate crock-
ery and glass-
ware
All
•
Wash 45 °C
•
Rinses
•
Dry
•
Prewash
•
Bring the appliance back to the programme
selection mode.
To CANCEL, press and hold
appliance is in programme selection mode.
USER MODE
User mode allows to change the following settings:
•
Adjust the level of the water softener according
to the water hardness.
•
Activate or deactivate the rinse aid empty
notification.
•
Activate or deactivate AirDry.
Before entering user mode, make sure the
appliance is in programme selection mode:
1. Press and hold
•
The indicators
As the appliance stores the saved settings, there is
no need to configure it before every cycle.
Consumption values
1)
Duration
Energy
(min)
(kWh)
75 - 85
1.0 - 1.1
14
0.1
and
.
,
and
Water
(l)
13 - 14
5
and
until the
flash.
Advertisement
Table of Contents
