Table of Contents
Advertisement
Available languages
Available languages
level of the water softener to assure good washing
results.
USING SALT, RINSE AID AND DETERGENT
•
Only use salt, rinse aid and detergent for
dishwasher. Other products can cause damage
to the appliance.
•
In areas with hard and very hard water we
recommend to use plain dishwasher detergent
(powder, gel, tablets containing no additional
agents), rinse aid and salt separately for optimal
cleaning and drying results.
•
At least once a month run the appliance with the
use of appliance cleaner which is particularly
suitable for this purpose.
•
Detergent tablets do not fully dissolve with short
programmes. To prevent detergent residues on
the tableware, we recommend that you use the
tablets with long programmes.
•
Do not use more than the correct quantity of
detergent. Refer to the instructions on the
detergent packaging.
WHAT TO DO IF YOU WANT TO STOP USING
MULTI-TABLETS
Before you start to use separately detergent, salt
and rinse aid do the following procedure.
1. Set the highest level of the water softener.
2. Make sure that the salt and rinse aid containers
are full.
3. Start the shortest programme with a rinsing
phase. Do not add detergent and do not load
the baskets.
4. When the programme is completed, adjust the
water softener according to the water hardness
in your area.
5. Adjust the released quantity of rinse aid.
6. Activate the rinse aid empty notification.
LOADING THE BASKETS
•
Only use the appliance to wash items that are
dishwasher-safe.
CARE AND CLEANING
WARNING! Before maintenance,
deactivate the appliance and
disconnect the mains plug from the
main socket.
•
Do not put in the appliance items made of
wood, horn, aluminium, pewter and copper.
•
Do not put in the appliance items that can
absorb water (sponges, household cloths).
•
Remove remaining food from the items.
•
Make soft the remaining burned food on the
items.
•
Put hollow items (cups, glasses and pans) with
the opening down.
•
Make sure that cutlery and dishes do not bond
together. Mix spoons with other cutlery.
•
Make sure that glasses do not touch other
glasses.
•
Put light items in the upper basket. Make sure
that the items do not move.
•
Make sure that the spray arm can move freely
before you start a programme.
BEFORE STARTING A PROGRAMME
Before you start the selected programme, make
sure that:
•
The filters are clean and correctly installed.
•
The cap of the salt container is tight.
•
The spray arms are not clogged.
•
There is enough salt and rinse aid (unless you
use multi-tablets).
•
The arrangement of the items in the baskets is
correct.
•
The programme is suitable to the type of load
and the degree of soil.
•
The correct quantity of detergent is used.
UNLOADING THE BASKETS
1. Let the tableware cool down before you
remove it from the appliance. Hot items can be
easily damaged.
2. First remove items from the lower basket, then
from the upper basket.
After the programme is completed,
water can still remain on the inside
surfaces of the appliance.
Dirty filters and clogged spray arms
decrease the washing results. Make a
check regularly and, if necessary,
clean them.
27
Advertisement
Table of Contents
