Water connection • This appliance is intended to be used in • Make sure not to cause damage to the water household and similar applications such as: hoses. – Staff kitchen areas in shops, offices and other working environments www.zanussi.com...
Model : PNC : Warning! Risk of electrical shock, fire or Serial Number : burns. Product description Worktop Lower spray arm Filters Rating plate Rinse aid dispenser Detergent dispenser Salt container Water hardness dial Upper spray arm Upper basket www.zanussi.com...
2. Set the water softener to the highest level. ance. 3. Make sure that the salt container and the 2. Make sure that the appliance is in setting rinse aid dispenser are full. mode. Refer to ‘SETTING AND STARTING A PROGRAMME'. www.zanussi.com...
Caution! Only use dishwasher salt. Other stains. products can cause damage to the appliance. Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. www.zanussi.com...
• Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not put in the appliance items that can ab- sorb water (sponges, household cloths). • Remove remaining food from the items. www.zanussi.com...
Page 9
Setting mode gramme starts. The appliance must be in setting mode to ac- – The wash indicator comes on. cept some operations. – The display shows the programme dura- The appliance is in setting mode when, after the tion. activation: www.zanussi.com...
Care and cleaning Cleaning the filters Warning! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Dirty filters and clogged spray arms de- crease the washing results. Make a check regularly and, if necessary, clean them. www.zanussi.com...
With some problems, the display shows an alarm code: • - The appliance does not fill with water. Problem Possible cause Possible solution The programme does not The mains plug is not connected in Connect the mains plug. start. the mains socket. www.zanussi.com...
Page 12
The spray arms could not turn freely. Make sure that the position of the items in the baskets is correct and does not cause the blockage of the spray arms. www.zanussi.com...
Page 13
ING A PROGRAMME’. 2. Press and hold function buttons (B) and (C) at the same time until the indicators above function buttons (A), (B) and (C) start to flash. 3. Press function button (B) . www.zanussi.com...
By ensuring this product where you purchased the product. is disposed of correctly, you will help prevent potential negative consequences for the • Discard correctly the packaging material. Re- cycle the materials with the symbol www.zanussi.com...