Table of Contents
Advertisement
PORCeLAIN PANeL INSTALLATION
NOTe: The contemporary porcelain liner kit can only be
used with a contemporary unit. The log porcelain liner kit
can only be used with a log unit.
40ICFPKB - Log Porcelain Liner Kit
VCFI41CPKB - Contemporary Porcelain Liner Kit Black
VCFI41CPKBZ - Contemporary Porcelain Liner Kit Bronze
Kit contents:
1, Rear Panel
1, Left Panel
1, Right Panel
1, Contemporary Support Bracket (Contemporary Kit
only)
4, #8 Screws (Contemporary Kit only)
4, Self-tapping Screws
Figure 14 -
Porcelain Panel Installation
Contemporary Support
Bracket
(Supplied w/Contem-
porary Kit)
Alignment Notches
Contemporary Porcelain
Panel Kit
20304685
Figure 14
1. Remove porcelain panels and hardware from packag-
ing.
2. For contemporary porcelain panel kit use supplied sup-
port for installation. Install support by installing two (2)
screws provided into holes in rear wall of insert chamber.
Install one (1) screw into hole in left and right sides of
insert chamber.
3. Carefully set rear porcelain panel on log support.
4. Carefully place right or left side porcelain panel in place
making sure alignment notches align with log support
and panel is pushed against the rear panel.
5
. Using self-tapping screws, secure side panels to firebox
wall. Side panels will hold rear panel in place.
6. Repeat Steps 4 & 5 for remaining side.
Remove Screws
Use Self-tapping
Left Porcelain
Screws
Panel
Alignment
Notches
VC41LDVI/VC41CDVI Gas Fireplace Insert
Existing
Support
Rear Porcelain
Panel
Right Porcelain
Panel
Log Porcelain Panel Kit
KT1638
15
Advertisement
Table of Contents
