Advertisement
Table of Contents
REQUIRED TOOLS
5/16" Allen Wrench
11/16" Wrench
1. PREPARE
Remove any fairleads currently installed on your
bumper. If needed, disconnect your winch hook.
KIT CONTAINS
Winch Line "Fishhook"
M10 Socket Head Screw
3/8" Lock Washer
M10 Hex Nut
3/8" Flat Washer
2. INSTALL
Slide your synthetic rope through the Fishhook's
cable slot followed by your winch's fairlead.
FB21094
Fits Standard Fairleads
Winch Line "Fishhook"
QTY
1
2
2
2
2
2109400
Advertisement
Table of Contents
Related Manuals for Fishbone Offroad FB21094
Summary of Contents for Fishbone Offroad FB21094
- Page 1 FB21094 Fits Standard Fairleads Winch Line “Fishhook” REQUIRED TOOLS KIT CONTAINS 5/16” Allen Wrench Winch Line “Fishhook” 11/16” Wrench M10 Socket Head Screw 3/8” Lock Washer M10 Hex Nut 3/8” Flat Washer 1. PREPARE 2. INSTALL Remove any fairleads currently installed on your bumper.
- Page 2 FB21094 Fits Standard Fairleads Winch Line “Fishhook” 3. FINALIZE Wrap the excess synthetic rope around the rope support and resecure your winch hook. Holding the two parts together, place them up to your bumper and into place using the two included bolts lead by a flat washer.
Need help?
Do you have a question about the FB21094 and is the answer not in the manual?
Questions and answers