Download Print this page

Plejd VRI-02 Installation Manual

Advertisement

Quick Links

Mains electricity
230 V/50 Hz
Standby power
0.3 W
External operating temperature
-20 to +35 °C
Dimensions
Installation depth: 28 mm
Installation dimensions: 51x48 mm
Center plate: 55x55 mm
Dial Ø 38 mm
Load type
1-pole or 2-pole with relay
Trailing edge
Leading edge
Protection
Overtemperature software
Overtemperature hardware
Overload software
Overload hardware
Radio
2.4 GHz mesh
Bluetooth
®
Radio range
Up to 10 m indoors.
The Plejd mesh technology extends the range by
allowing the units to communicate with each other.
RISK OF INJURY TO PERSON OR PROPERTY
All work on the appliance must be
carried out by an authorized electrician.
National laws and regulations
must be followed.
Compliant to standards
Hereby, Plejd AB declares that the radio
equipment type VRI-02 is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity
is available at the following internet address:
plejd.com
Plejd AB
Krokslätts fabriker 27A
431 37 Mölndal
Sweden
Manufacturer | Plejd AB
Country of manufacture | Sweden
EN
V R I - 0 2
INSTALLATION MANUAL
Further information can be found
in the Plejd app or at plejd.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the VRI-02 and is the answer not in the manual?

Questions and answers

Summary of Contents for Plejd VRI-02

  • Page 1 INSTALLATION MANUAL Installation dimensions: 51x48 mm Hereby, Plejd AB declares that the radio Center plate: 55x55 mm equipment type VRI-02 is in compliance with Dial Ø 38 mm Directive 2014/53/EU. Load type The full text of the EU declaration of conformity...
  • Page 2 During installation the product is non-dimmable. Use the app to configure before use. Download the Plejd app via the App Store or Google Play. After supplying power to the unit by following the relevant wiring diagram, use the app to complete the installation.