Congratulations, you have finished! Now go enjoy your car on the track.
Use the box and foam inserts the kit shipped in to store and transport your model. Remove the top
layer of foam and the two foam blocks. Carefully place the model into the rectangle cutout in the
foam. You will need to slightly spread out the foam on the ends of the car while moving it in and out
of the foam. Reverse these steps to take the model back out of the packaging. The foam blocks
should be placed so they do not sit on top of the brake wheels. Finally, lay the top layer of foam on
top of the foam blocks, close the lid of the box, and slide the box into the sleeve.
Page 20 of 20
railfanmodels.com