Table of Contents
Advertisement
40
2. Clean the water tank regularly (about once a month) and when-
ever you replace the water softener filter (C6) (*if present) with
a damp cloth and a little mild washing up liquid, then rinse
thoroughly.
3. Replace the filter (*if present), fill the tank with fresh water
and replace the tank.
4. (Models with water softener filter only) Deliver about 100
ml/ 3.4 fl oz of water.
Danger!
While cleaning, never immerse the coffee maker in water. It is an
electrical appliance.
13.7 Cleaning the bean container
Without extracting it, clean the bean container regularly with
a cloth.
For more thorough cleaning, proceed as follows:
1. Make sure the bean container (A2) is empty. If necessary,
operate the coffee mill without beans to empty it:
2. Release the bean container by turning it counterclockwise
and extract from the appliance.
41
6. Put the container back as described in section "3. Setting
up the appliance".
13.5 Cleaning the boiler
outlet
After every 200 coffees, rinse
the boiler outlet. Press the
rinse button (B4) and
deliver about 200 ml/ 6.76 fl
oz of water.
13.6 Cleaning the water
tank
1. Remove the filter (*if
present) and rinse with
running water.
3. Wash the container and
lid (A1) with warm water.
Do not wash the compo-
nents in a dishwater or
use washing up liquid! Dry
all accessories thoroughly
before using again.
4. Remove coffee residues
(fig. 41);
5. Clean the bean contain-
er housing with a damp
cloth and dry;
13.8 Cleaning the burrs
When cleaning the bean container, clean the container housing
and upper burr with a damp cloth. The burr can be removed and re-
placed when worn. Contact an authorised customer services centre.
You may also need to remove the burr if it becomes blocked with
foreign matter. If this occurs, clean as follows:
1. Empty the bean container (if necessary, using a vacuum
cleaner to remove any remaining beans).
2. Attach the portafilter and operate the grinder without
beans to free the coffee guide, then attach the portafilter
to the outlet of the coffee grinder (A22), lining it up with
"INSERT", then turning it to the right (fig. 18). Grinding be-
gins when the portafilter reaches the CLOSE position and
stops automatically;
3. Turn the appliance off;
4. Remove the bean container as described in the previous
section "13.7 Cleaning the bean container".
5. Turn the fineness selector counterclockwise as far as it will
go to the "REMOVE" position (fig. 42).
8. Put the upper burr back in place:
14
19 42
6. Extract the upper burr,
gripping it by the handle
(fig. 43).
7. Clean the burr with a
brush (fig. 44) and remove
the coffee residues using a
vacuum cleaner (fig. 41).
44
19
43
Hide quick links:
Advertisement
Table of Contents
