Using Pre-Ground Coffee; Delivering Hot Water - DeLonghi La Specialista EC9335M Instructions Manual

Always check that there is the right amount of coffee in the filter
(see section "4.4 Adjusting the quantity of ground coffee in the
filter").
• COFFEE
Beverage of European origin, a long coffee with a delicate
aroma.
Coffee Pre-
infusion
✗
Always check that there is the right amount of coffee in the filter
(see section "4.4 Adjusting the quantity of ground coffee in the
filter").
• AMERICANO
Beverage of American origin, a long coffee. Made by deliv-
ering an espresso, followed by hot water added directly to
the cup. Only one cup can be made at a time.
Coffee Pre-
infusion
✓
Always check that there is the right amount of coffee in the filter
(see section "4.4 Adjusting the quantity of ground coffee in the
filter").
6. CUSTOMISING THE VOLUME OF COFFEE
BEVERAGES WITH THE
1. Prepare the appliance to deliver 1 or 2 cups of the coffee
beverage you want to make, as far as attaching the porta-
filter (C1) complete with the (C2) or (C3) filter and ground
coffee.
2. Turn the dial (B8) to select the coffee to be programmed.
C2
Quantity Filter
C2
1 cup
2.4 fl oz /
70 ml
C3
2 cups
4.7 fl oz /
140 ml
C3
C2
Quantity Filter
C2
1 cup
4.1 fl oz /
120 ml
RECOMMENDED:
C3
1 cup
8.1 fl oz /
240 ml
C3
BUTTON (B7)
3. Press the
button (B5) comes on steadily and the light corresponding
to the button flashes.
4. Press the "OK" button to start delivering the beverage. The
lights corresponding to the "OK" and
5. When you have reached the desired quantity of the bever-
age, press the "OK" button again.
6. Press the
is ready for use again and the
If you do not want to save the new setting, press any other
button.
✗
Programming Americano coffee: follow the procedure described
above for the quantities of both coffee and hot water.
Please note:
✓
• You can programme coffee beverages, but not steam and hot water.
• Programming changes the quantity of the beverages, but not the amount of
coffee ground.
• "X2" beverages can be programmed separately.
6.1 Beverage reset
To reset the default beverage quantities, press and hold the
button (B7) until it goes off.
The selected beverage is reset to the default values.

7. USING PRE-GROUND COFFEE

1. Place the ground coffee filter (C2) or (C3) in the portafilter
(C1) (fig. 17);
2. Place the quantity of ground coffee in the filter;
3. Turn the dial (B2) to the
mill;
✗
4. Attach the portafilter to the outlet of the coffee mill (A22),
aligning it with "INSERT", then turning it to the right (fig.
10).
5. Pull the tamping lever (A23) as far as it will go. The
printing on the lever indicates the tamping force exerted
✓
(
6. Remove the portafilter by turning it towards the left.

8. DELIVERING HOT WATER

1. Choose the cup and place it on the correct cup grille ((A10)
or (A11)).
2. Press the
water from the spout (A5) then goes off automatically.
3. To interrupt delivery, press the
9. HOW TO MAKE MILK-BASED BEVERAGES
1. Pour the quantity of milk you want to heat/froth into the
milk jug (C9), remembering that the volume of milk dou-
bles or triples in volume. For a denser more even froth, you
10
button: the light corresponding to the "OK"
button to save the new setting. The appliance
button remains on.
position to disable the coffee
) (fig. 19).
button (B6): the appliance delivers hot
button again.
buttons flash.