Table of Contents
Advertisement
7 1⁄4" Circular Saw 10 Amp
Operator's Manual
Specifications:
• Model # GCS100
• Description: 7 1⁄4" Circular Saw
• Input: 120V AC, 60Hz, 10.0 Amp
• Blade Size: 7 1⁄4"
• Blade Bevel: 0-45 degrees
• No-Load Blade Speed: 5000 RPM
• Arbor Size: 5/8"
• Cutting Capacity at 90 degrees: 2-9/16"
• Cutting Capacity at 45 degrees: 1-5/8"
• Net Weight: 11.6 lbs.
• Includes: Circular Saw with Carbide Blade, Blade Wrench, and Rip Guide
WArning:
To reduce the risk of injury, user must read and understand this operator's manual before operating this tool. Save this
Manual for future reference.
Toll-Free Help Line: 1-888-552-8665.
WeAR YOuR
WArning:
SAfeTY GLASSeS
The Operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye
damage. Before beginning tool operation, always wear safety goggles or safety glasses with side shields and a full face shield
when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
fOReSIGHT IS BeTTeR
THAN NO SIGHT
Always wear eye protection which is marked to comply with ANSI Z87.1.
Look for this symbol to point out important safety precautions.
it means attention!!! Your safety is involved.
gEnErAL SAFETY rULES
WArning:
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
7 1⁄4" Circular Saw
Operator's Manual
GCS100
Advertisement
Table of Contents
