Specifications; General Safety Rules - Genesis GCS130 Operator's Manual

SPECIFICATIONS

• Model: ------------------------ GCS130
• Rated Power: ----------------- 120V~ /60Hz, 13 Amp
• No Load Speed: --------------- 5,500 RPM
• Blade Size: -------------------- 7-1/4" (185mm)
• Cutting Capacity at 90°: -------2-7/16" (62mm)
• Cutting Capacity at 45°: -------1-13/16" (46mm)
• Net Weight: -------------------- 8 .2 lb.
Includes: 24T Carbide-Tipped Blade, Rip Guide, and Blade Wrench
WArNING:
operator's manual before operating this tool. Save this manual for future reference.
Toll-Free Help Line: 1-888-552-8665
WeAR YouR
SAfeTY GLASSeS
foReSIGHT IS BeTTeR
THAN No SIGHT
Look for this symbol to point out important safety
precautions. It means attention!!! Your safety is
involved.

GENErAL SAFETY rULES

WArNING:
and other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as
those dust masks that are specially designed to filter out microscopic particles.
WArNING:
instructions before using this product. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious personal injury.
WORK AREA SAFETY
Keep your work area clean and well lit.
•
Do not operate power tools in explosive atmospheres,
•
flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
13 Amp, 7-1/4" Circular Saw
Operator's Manual
T
o reduce the risk of injury, user must read and understand this
WArNING:
The operation of any power tool can result in foreign
objects being thrown into your eyes, which can result in severe eye damage.
Before beginning tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We recommend Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with side
shields. Always wear eye protection which is marked to comply with ANSI Z87.1.
Some dust created by power sanding, sawing, grinding, drilling,
read and understand all warnings, cautions and operating
SAVE THESE INSTRUCTIONS
Cluttered benches and dark areas invite accidents.
such as in the presence of
GCS130