Emerson Fisher FIELDVUE DVC6200 Series Quick Start Manual page 17

Quick Start Guide
D103556X012
DVC6205 Remote Mount Base Unit Mounting
For remote‐mounted digital valve controllers, the DVC6205 base unit ships separately from the control valve and does
not include tubing, fittings or wiring.
Pipestand Mounting
1. Position a standoff on the back of the base unit.
2. Using two 101.6 mm (4‐inch) 1/4‐20 hex head screws loosely attach the base unit to the pipestand with the
mounting bracket.
3. Position the second standoff, then using the remaining 101.6 mm (4‐inch) hex head screws, securely fasten the
base unit to the pipe stand.
4. Tighten all screws.
5. Proceed to Step 2—Connect the Pneumatic Tubing on page 19.
Figure 14. FIELDVUE DVC6205 Pipestand Mounting
X0437
STANDOFF
DVC6200 Digital Valve Controllers
4‐INCH 1/4‐20
HEX HEAD SCREW
MOUNTING BRACKET
July 2017
17