1. Manuals
  2. Brands
  3. Nitto Kohki Manuals
  4. Grinder
  5. MLG-25
  6. Instruction manual

Nitto Kohki MLG-25 Instruction Manual

Pneumatic
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PNEUMATIC ANGLE GRINDER
Please read this manual carefully before you attempt to use
your tool so that you may use it properly and safely.
MYTON
PROFESSIONAL TOOL
Rated Air Pressure
Air Consumption (No Load)
Rated Speed (No Load)
Depressed Center
Grinding Wheel
Mass (Weight)
Sound Pressure Level
Sound Power Level
Vibration Level
Thread size of Air Inlet
Due to continuous product development/improvement the specifications and
configurations in this document are subject to change without prior notice.
Keep the manual handy – so you can use it whenever necessary.
Model MLG-25
Specifications
Model
MPa
3
m
/min
-1
min
(r/min)
Diameter
mm(inch)
Hole
mm(inch)
dB(A)
dB(A)
m/s
Manufactured by :
NITTO KOHKI Co., Ltd.
2-9-4, Nakaikegami, Ohta-ku,
Tokyo, 146-8555, Japan
TEL
FAX
E-mail : overseas@nitto-kohki.co.jp
URL : www.nitto-kohki.co.jp
MLG-25
0.6
0.42
19,000
58 (2-9/32)
9.6 (3/8)
kg
0.6
90
95
2
1.8
Rc1/4
: (81)-3-3755-1111
: (81)-3-3753-8791
Original Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MLG-25 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Nitto Kohki MLG-25

Summary of Contents for Nitto Kohki MLG-25

  • Page 1 Thread size of Air Inlet Rc1/4 Due to continuous product development/improvement the specifications and configurations in this document are subject to change without prior notice. Manufactured by : NITTO KOHKI Co., Ltd. 2-9-4, Nakaikegami, Ohta-ku, Tokyo, 146-8555, Japan : (81)-3-3755-1111 : (81)-3-3753-8791 E-mail : overseas@nitto-kohki.co.jp...

  • Page 2: Table Of Contents

    ・  8. MAINTENANCE ………………………………………… 7 nach eine Betriebsanleitung in 9. ORDERING SERVICE PARTS ………………………… 7 Landessprache. 10. EXPLODED DIAGRAM : MLG-25 ……………………… 8 French : S'il vous plait, veuillez demandez ・  á votre foumisseur de manuel PICTOGRAM instruction en langue locale.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY BEFORE OPERATION INSTRUCTIONS Inspect tool before use. ● Before using, check that screws are securely When using the tool, please observe the safety tightened, that any protective cover or guard is precautions below to prevent possible accident or securely in place, other parts are free from damage injury.

  • Page 4: General: Pneumatic Tools

    Do not pull the air hose to disconnect. When a label/nameplate gets damaged, worn or becomes missing, contact the sales agent through which you have purchased your tool or Nitto Kohki Co. Ltd, directly for a replacement. DISPOSAL When a tool is taken permanently out of service, it ●...

  • Page 5: Instructions For This Tool

    Grinding Wheel prior to use. Do not use Wheels to make sure there is no problem on the any wheels wet or without labels. grinder. Use Nitto Kohkiʼs Wheel Flanges only. However, ●  Grind slowly until the Grinding Wheels get ● ...

  • Page 6: Usage

    Use with Type 27 Depressed Center Grinding Wheels. purchased the tool. Package Contents Check MYTON MLG-25 Grinding Wheel GS #80 Hex. Socket Screw Key 5 Single Ended Spanner 19 Bushing R1/4×NPT1/4 Instruction Manual Fig.

  • Page 7: Mounting And Dismounting Grinding Wheel

    5. MOUNTING AND DISMOUNTING GRINDING WHEEL 6. HOW TO OPERATE THE TOOL Start and Stop WARNING To start, release the lock lever and grasp the throttle lever. Always turn off the air supply and disconnect the air To stop, release the throttle lever. supply hose.

  • Page 8: Storage

    7. STORAGE 9. ORDERING SERVICE PARTS For further operational and handling information or ● CAUTION: for replacement of parts and components, contact the company from whom you purchased the tool or When tool is not used, store it out of reach of an authorized dealer.

  • Page 9: Exploded Diagram : Mlg-25

    10. EXPLODED DIAGRAM : MLG-25 WARNING This diagram is for your reference only. Do not attempt to service or repair the Tool. Do not take the Tool apart. Contact an authorized Nitto dealer for all service and repair of the Tool.
  • Page 10 Tel: (65)-6227-5360 Fax:(65)-6227-0192 http://www.nitto-kohki.co.jp/e/nksb/ Nitto Kohki Europe Co., Ltd. Unit 21, Empire Centre, Imperial Way, Nitto Kohki Co., Ltd. Shanghai Representative Office Watford Hertfordshire, WD24 4TS, United Kingdom #1117 Ruijing Building, Maoming South Road, Shanghai 200020 China Tel: (44)-01923-239668 Fax:(44)-01923-248815 http://www.nitto.co.uk/...

Table of Contents