Nitto Kohki DIMMER MONOCANALE MULTIPROTOCOLLO COSTANT CURRENT Instruction Manual

INSTRUCTION
MANUAL
[Specifications]
Maximum operating pressure
Air consumption (No load)
Rated speed (No load)
Grinding Wheel outer diameter
Mass (weight)
Sound pressure level *1
Sound power level *1
Vibration level *2
Based on the ISO15744 measurement standard.
*1
Based on the 3 axes combined value measurement standard of the
*2
ISO28927-1 of the hand-held tool frequency correction vibration
acceleration effective value.
 Please read manual carefully before you attempt to use your tool so that you may use it properly 
and safety.
 Keep the manual handy - so you can use it whenever necessary. 
• Due to continuous product development/improvement, the specifications and configurations in this
document are subject to change without prior notice.
Manufactured by.
NITTO KOHKI CO., LTD.
Professional tool
Model: MYGL-40/MYGM-40
 The end tool in the drawing is not included with the tool. 
Model
MPa
m /min
3
min
-1
mm
kg
dB (A)
dB (A)
m/s
2
9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo, 146-8555, Japan
Tel : +81-3-3755-1111 Fax : +81-3-3753-8791
Pneumatic Grinder
Japan Use Only
MYGL-40 MYGM-40
0.6
0.40 0.45
13000 11000
100
1.1 1.2
82 85
93 96
4.7 4.3
TQ15290-0 05/2017