Nitto Kohki Myton MYG-25 Instruction Manual

INSTRUCTION
MANUAL
[Specifications]
Maximum operating pressure
Air consumption (No load)
Rated speed (No load)
Depressed Center Grinding Wheel outer diameter
Depressed Center Grinding Wheel hole diameter
Mass (weight)
Sound pressure level *1
Sound power level *1
Vibration level *2
Thread size of Air Inlet
Based on the ISO15744 measurement standard.
*1
Based on the 3 axes combined value measurement standard of the ISO28927-1
*2
of the hand-held tool frequency correction vibration acceleration effective value.
 Please read manual carefully before you attempt to use your tool so that you may use it properly

and safely.
 Keep the manual handy - so you can use it whenever necessary.

• Due to continuous product development/improvement, the specifications and configurations in this
document are subject to change without prior notice.
Manufactured by.
NITTO KOHKI CO., LTD.
Professional tool
Model: MYG-25
Model
9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo, 146-8555, Japan
Tel : +81-3-3755-1111 Fax : +81-3-3753-8791
Pneumatic Grinder
MYG-25
MPa 0.6
m /min 0.42
3
min 19000
-1
mm (inch) 58 (2-9/32")
mm (inch) 9.6 (3/8")
kg 0.6
dB (A) 82
dB (A) 93
m/s ≤ 2.5
2
Rc 1/4
TQ15263-0 07/2017