Installation Instruction - Pentair BIG BLUE20 Manual

 This installation must comply with all applicable
state and local regulations.
 Use only Teflon
seal joints. Do not use pipe compound (pipe dope),
sticks, or similar compounds; they contain
petroleum derivatives which will cause crazing
and cracking of the plastic in the filter housing.
 Use only soap and water to clean filter housing
and components.
 Do not use aerosol sprays (bug spray, cleaning
fluids, etc.) near the filter. They contain organic
solvents which will cause crazing and cracking of
the plastic in the filter housing.
 After prolonged periods of non-use, such as a
vacation, it is recommended that the system be
flushed thoroughly. Let water run for 5-6 minutes
before using.
 Wear safety glasses during installation.

Installation Instruction

Suggested Installation of BIG BLUE20
®
tape without adhesive backing to
The recommended installation has a shut-off valve on the
inlet side of the filter. The installation had shown uses PVC
piping.