Table of Contents
Advertisement
YoLink Control
YoLink Control is our unique "device to device" control technology. Under YoLink Control,
the devices could be controlled without internet or Hub.
Devices which send out command is called controller(Master). Devices which receive
command and act accordingly is called responder(Slave).
You will need to physically set it up.
Pairing
Find a door sensor as controller(Master). Hold the
set button for 5-10 seconds, the lights will flash
green quickly.
Find an action device as responder(Slave). Hold
the set button for 5-10 seconds, the device will
enter pairing mode.
After pairing is done, the light will stop flashing.
When the door is detected to be opened, the
responder will be turned on as well.
SET Button
7
Advertisement
Table of Contents
Need help?
Do you have a question about the YS7704-UC and is the answer not in the manual?
Questions and answers