Table of Contents
Advertisement
Unpairing
Find a controller(Master) door sensor . Hold the set
button for 10-15 seconds, the lights will flash red
quickly.
Find a responder(Slave) action device. Hold the
set button for 10-15 seconds, the device will
enter unpairing mode.
The above two devices will unpair by themselves
and after unpairing is done, the light will stop
flashing.
When the door is detected to be opened, the
responder will no longer turned on.
SET Button
8
Advertisement
Table of Contents
Need help?
Do you have a question about the YS7704-UC and is the answer not in the manual?
Questions and answers