4
Tilt the ink tank, then insert it under the label and
against the back end of the slot.
Make sure that the color of the label matches the ink
tank.
•
Install in a well-lit environment.
5
Press the PUSH mark on the ink tank firmly until
it clicks.
When the installation is completed properly, the Ink
lamp lights red.
6
Install all the other ink tanks in the same way
according to the color order indicated on the
label.
Make sure all the Ink lamps light red.
•
Once you have installed the ink tanks, do not
remove them unnecessarily.
•
If the Print Head Holder moves to the right,
close and reopen the Scanning Unit (Cover).
3 Install the Ink Tanks