Canon PIXMA MG8120 Series Getting Started Manual page 14

7
F
Close the Scanning Unit (Cover) (E).
Make sure the Inner Cover (F) is closed.
• For your safety, always close the Scanning Unit (Cover) with both hands.

3 Install the Ink Tanks
E
8
Make sure that the LCD changes as shown in the illustration
and go to the next step.
Do not touch the OK button yet.
• It takes about 5 minutes before the LCD changes.
• The machine may make some operating noises when
preparing to print. This is normal operation.
• If an error message is displayed on the LCD, make sure
that the Print Head and the ink tanks are correctly installed.