Table of Contents
Advertisement
One-touch lane change function
To activate an one-touch lane
change function, move the turn sig-
nal lever slightly and then release it.
The lane change signals will blink 3,
5 or 7 times.
You can choose one-touch lane
change blinking function in "One
touch turn lamp" of "User setting".
Refer to "User setting" in chapter 4.
✽ ✽ NOTICE
If an indicator flash is abnormally
quick or slow, bulb may be burned
out or have a poor electrical connec-
tion in the circuit.
Front fog light (if equipped)
■ Type A
■ Type B
Fog lights are used to provide
improved visibility when visibility is
poor due to fog, rain or snow, etc.
Features of your vehicle
1. Turn on the park light.
2. Turn the light switch (1) to the front
fog light position.
3. To turn off the front fog light, turn the
light switch to the front fog light posi-
tion again or turn off the park light.
CAUTION
When in operation, the fog lights
consume large amounts of vehi-
cle electrical power. Only use the
ORP042122
fog lights when visibility is poor.
ORP042122R
4 127
Advertisement
Table of Contents
